DRILL BUSHINGS

  • CARBIDE - HEADLESS PRESS FIT - TYPE "PC"

Permits close spacing mounting flush with jig surface without counterboring.
Quoted on request as specials and are not returnable.
[Ordering Information]

I.D. and O.D. Range:

[#70 - #56x 5/32 O.D.] [#30 - 3/16 x 5/16 O.D] [3/8 - 1/2 x 3/4 O.D] [1 - 1-3/8 x 1-3/4 O.D.]
[3/64 - 1/16 x 5/32 O.D] [3/16 - 1/4 x 13/32 O.D.] [1/2 - 5/8 x 7/8 O.D] [1 - 1-3/4 x 2-1/4 O.D.]
[#54 - #39 x 13/64 O.D] [7/32 - 5/16 x 1/2 O.D] [1/2 - 3/4 x 1 O.D.]  
[#39 - #29 x 1/4 O.D] [5/16 - 27/64 x 5/8 O.D.] [3/4 - 1 x 1-3/8 O.D.]  
3488 FM 730 North, Decatur, TX 76234
Phone: 940-627-6031 | Toll Free: 877-5DALTEX | Fax: 940-627-7832
info@dal-texenterprises.com