DRILL BUSHINGS

  • HEADLESS PRESS FIT, TYPE "P"
This drill bushing is the most popular and least expensive. Permits close spacing mounting flush with jig surface without counter boring.

[Technical & Ordering Information]


I.D. and O.D. Range:
[COUNTER BORE DATA]

[#80-#70 x 5/32 O.D.] [#55-1/16 x 13/64 O.D.] [3/16-"O" x 1/2 O.D.] [55/64-15/16 x 1-1/4 O.D.]

[#69-3/64 x 5/32 O.D]

[#52-#39 x 13/64 O.D] ["M"-11/32 x 9/16 O.D.] [5/8 - 1-1/32 x 1-3/8 O.D.]
[#55-1/16 x 5/32 O.D]  [#40-9/64 x 1/4 O.D]  [5/16-7/16 x 5/8 O.D. ]  [1-1/64 - 1-1/8 x 1-1/2 O.D.]
[#55-1/16 x 3/16 O.D]  [1/8-#10 x 5/16 O.D.]  [5/16-17/32 x 3/4 O.D.]  [1 - 1-25/64 x 1-3/4 O.D.]  
[#52-#39 x 3/16 O.D] [#10-#1 x 3/8 O.D.] [1/2-21/32 x 7/8 O.D.] [1-3/8 - 1-49/64 x 2-1/4 O.D.]
[#80-#70 x 13/64 O.D.] [3/16-"F" x 13/32O.D.] [1/2-49/64 x 1 O.D.] [Entire Range]
[#69-3/64 x 13/64 O.D]  ["A"-"L" x 7/16 O.D.]   [49/64-27/32 x 1-1/8 O.D.] [Larger Sizes]  
Back

Drill Bushings | Tooling Components | Toggle Clamps

3488 FM 730 North, Decatur, TX 76234
Phone: 940-627-6031 | Toll Free: 877-5DALTEX | Fax: 940-627-7832
info@dal-texenterprises.com