TOGGLE CLAMPS

Posi-Grip(tm) Toggle Clamps

  • HORIZONTAL HANDLE TOGGLE CLAMPS
HORIZONTAL MINIATURES
These are the smallest of the horizontal handle toggle clamps. The handle of this model has been lengthened for increased leverage and gripping.

Available in solid bar, U-bar, straight and flange base versions.

Spindle supplied:       	*81-104
Optional Steel Spindle: 	 81-105
Holding capacity:       	 60 lbs. max.
Movements:              Handle 80o, Bar 90o
Weight:                  		 1 oz. (0.065 lb.) 
*Nylon spindle assembly 

P/N 80-010

HORIZONTAL SPACE - SAVERS
These low profile horizontal clamps have overall height of under 1-1/2". This model features a U-bar with either a flange or straight base.
*To increase the vertical clamping height on the straight base model, use the optional mounting brackets.
Spindle supplied:   		81-301
Holding capacity:   		200 lbs. max.
Movements:           		Handle, Bar 90o
Weight:              		0.25 lb. 

P/N 80-020

HORIZONTAL EXTRA-HOLD (Low Profile)
These low profile horizontal clamps are similar to models 80-020 and 80-021 except these are stronger. Their base is specifically designed for great rigidity.
Spindle supplied:     81-401
Holding capacity:     500 lbs. max.
Movements:            	Handle 65o,Bar 90o
Weight:             	0.6 lbs. 

P/N 80-030

HORIZONTAL SUPER-HOLD
These are heavy duty versions of the low profile series of horizontal clamps, featuring an exceptionally long reach of over three inches.
The unique T-slot adaptor plates can be used as riser blocks to increase bar clearance and/or to adapt the toggle clamp for use on tables with T-slots.
Spindle supplied:    	81-501
Holding capacity:    	750 lbs. max.
Movements:            	Handle 55o, Bar 90o
Weight:                   	1.5 lbs. 

P/N 80-040

HORIZONTAL HEAVY-DUTY
The first in a series of heavy duty clamps featuring a cast base with a T-slot bolt mounting hole. This unique mounting hole feature allows this clamp to be adapted for use on tables with T-slots. The cast base is shock absorbent and rigid to meet heavy duty requirements, while maintaining a smooth action. The hardened pin and bushing construction increase the clamp's durability many times over. These models are supplied with flange washers and accept all 3/8" spindles. Spindles are to be ordered separately.
Holding capacity:   	1400 lbs. max.
Movements:         Handle 90o, Bar 90o
Weight:          		 4.25 lbs. 

P/N 80-060

3488 FM 730 North, Decatur, TX 76234
Phone: 940-627-6031 | Toll Free: 877-5DALTEX | Fax: 940-627-7832
info@dal-texenterprises.com