TOGGLE CLAMPS

Posi-Grip(tm) Toggle Clamps

  • VERTICAL HANDLE TOGGLE CLAMPS
VERTICAL MINIATURES
These are the smallest of the vertical handle toggle clamps. The U-shaped hold down bar provides a selection of spindle positions. These models are ideal for light duty applications.
Spindle supplied:     81-201
Holding capacity:    100 lbs. max.
Movements:           Handle 175o, Bar 92o
Weight:              	  2 oz. (0.13 lb.

P/N 80-100

EXTRA-HOLD SPACE SAVER
This low profile model is one of a kind in toggle clamp design. Its unique handle can be operated from either side or from behind.
This model provides considerable holding capacity considering its size, and is ideal for circuit board work and other light duty applications.
The width of the handle is 1/4" wider than similar clamps on the
market, which makes for better gripping.
Spindle supplied:   81-201
Holding capacity:  150 lbs. max.
Movements:           Handle 175o, Bar 92o
Weight:              	2 oz. (0.13 lb.)

P/N 80-105

VERTICAL EXTRA-HOLD
This model is similar to the 80-100, but offers twice the holding capacity. The holddown bar is designed to accept the spindle assembly in a fixed position located at the end of the bar.
Spindle supplied:    81-301
Holding capacity:   200 lbs. max.
Movements:            Handle 69o,  Bar 117o
Weight:              	 0.35 lbs.

P/N 80-110

VERTICAL SUPER-HOLD
These are the most popular models in the vertical series. This series offers the largest selection of features to meet most applications.
Spindle supplied:    81-401
Holding capacity:   500 lbs. max.
Weight:              	 0.8 lbs.

P/N 80-121

VERTICAL SUPER-HOLD
This model series is ideal for many applications due to its size and outstanding holding capacity. The holddown bar will accept all 3/8" spindles.
All solid bar models are supplied with bolt retainers. U-bar models are supplied with flange washers. Spindles are to be ordered separately.
Holding capacity:   750 lbs. max.
Movements:         Handle 58o, Bar 106o
Weight:              	1.25 lbs.

P/N 80-131

VERTICAL COMPACT HEAVY-DUTY
This unique heavy duty model has many features. Its design makes it one of a kind: a Y-shape front reinforces the holddown bar. The front nut may be tightened without interfering with the bar action. An inserted roll pin can be used to reduce the handle and bar movements. Its hardened pin and bushing construction
makes this model ideal for heavy loads. In addition to being compact in size, it has a super smooth movement. A bolt retainer is furnished with solid bar models, and flange washers are furnished with U-bar models. The holddown bar will accept all 1/2" spindles. Spindles are to be ordered separately.

Holding capacity:  1,000 lbs. max.
Movements:         
(without roll pin), 
                                Handle 67o,  Bar 140o
Movements:         
(with roll pin)
                                Handle 58o, Bar 100o
Weight:
                    2.4 lbs.

P/N 80-140

VERTICAL EXTRA-HEAVY DUTY
This heavy duty model has many features such as a super smooth movement and two stop holes with a roll pin which provide the user with a choice of handle and bar movements.
This model is supplied with flange washers and accepts all 5/8" spindles. Spindles are to be ordered separately.
Holding capacity:  1,200 lbs. max.
Movements:	(with pin in the bottom stop hole)
                     	Handle 70o,  Bar 140o
Movements:	(with pin in the top stop hole)
                     	Handle 56o, Bar 108o
Weight:             	5.0 lbs.
3488 FM 730 North, Decatur, TX 76234
Phone: 940-627-6031 | Toll Free: 877-5DALTEX | Fax: 940-627-7832
info@dal-texenterprises.com