TOGGLE CLAMPS

DE-STA-CO CLAMPS

  • STRAIGHT-LINE ACTION TOGGLE CLAMPS
Model 610 straight-line action clamps are widely used for gluing applications in the woodworking industry. The customer adds his own spindle pads to permit using full clamping force without damaging the wood.

REGULAR MOVEMENT
Plunger moves forward and locks as handle is moved forward. Plunger also locks in retracted position when handle is moved backward.

REVERSE HANDLE MOVEMENT
Plunger moves forward and locks as handle is moved backward to horizontal position. Plunger retracts as handle is moved forward but does not lock in retracted position.

MODELS 601, 601-0
Smallest of the straight-line toggle clamps. Ideal for electronic applications and similar small fixturing. Model 601 has an 8-32 nylon spindle assembly (105203). Model 601-0 has externally threaded 1/4-20 plunger tip. Red handle grip is supplied on all non-stainless steel models.
Holding capacity:   100 lbs.
Weight:                  2 oz.
Plunger travel:       5/8" 

MODELS 602, 604, 624, 6004
Fully retractable locators, these models mount directly through a member by a jam nut on the work side or flush by drilling and tapping the member. Locks in extended or retracted position. When flush mounted, plunger completely retracts from work area. An optional base mounting detail is available for Model 604 as part no. 604106, and for Model 624 as part no. 624108. Model 602 is provided with an ergonomic handle grip, while models 604 and 624 are provided with red vinyl handle grips.
Holding capacity:
Model 602 ---------- 200 lbs.
Model 604 ---------- 300 lbs.
Model 624 ---------- 700 lbs.
Weight:
Model 602 ---------- 4 oz.
Model 604 ---------- 10 oz.
Model 624 ---------- 1 lb. 58 oz.
Plunger travel:
Model 602 ---------- 3/4 in.
Model 604 ---------- 1-1/2 in.
Model 624 ---------- 2-5/8 in.
MODEL 603
This straight-line action toggle clamp has a large holding capacity for its size. The 603 is well adapted for use in confined areas because of its small package size and low height. The red vinyl handle is slanted forward to provide an adequate grip and yet enhance the low silhouette. Locks in both the extended and retracted positions. Plunger is tapped for 5/16-18 adjustment spindle or detail.
Holding capacity:   600 lbs.
Weight:                 11 oz.
Plunger travel:        1-1/4" 
MODEL 605
For push and pull clamping. Furnished with red vinyl grip. Plunger is tapped for 5/16-18 adjustment spindle. Base is heat treated for added strength.
Holding capacity:   300 lbs.
Weight:                 11 oz.
Plunger travel:       1-1/4" 
MODEL 606
Features an unusual 180o swiveling handle and linkage. Model 606 can be mounted in many positions with the handle remaining in an upright or other convenient position. This feature and its narrow base permit use where other clamps won't fit. Heat treated base. Red vinyl-dipped handle provided for operator comfort. This model clamps in only the extended position. Plunger is tapped for 5/16-18 adjustment spindle or detail.
Holding capacity:   450 lbs.
Weight:                 12 oz.
Plunger travel:        1-1/2" 
MODEL 607, 607-SQ
Extremely compact for its large capacity, this low silhouette clamp locks in either extended or retracted position. From the mounting surface to centerline of plunger is only 1-1/16". Model 607 has a round plunger. Model 607-SQ has a 1/2" square plunger for multiple point locating. Both models are drilled and tapped to accept any 5/16"-18 detail Comes complete with red vinyl-dipped handle.
Holding capacity:   800 lbs.
Weight:                 1 lb., 10 oz.
Plunger travel:        1-5/8" 

 

MODEL 608
850 lbs. of holding capacity in a low-profile clamp weighing only 20 ounces. Plunger locks in both retracted and extended positions. Plunger is tapped for 3/8-16 adjustment spindle. The cast base provides added strength. Handle is red vinyl-dipped.
Holding capacity:   850 lbs.
Weight:                1 lb., 4 oz.
Plunger travel:       1-5/8" 
MODEL 609, 609-B
This low profile clamp locks in either the extended or retracted position. The plunger is drilled and tapped to accept 5/16-18 customized fixture or neoprene tipped spindle. The plunger retracts completely to clear the work area. Also available as Model 609-B with a straight base. Equipped with an ergonomic handle grip. Model 609 is directly interchangeable with model 605.
Holding capacity:   300 lbs.
Weight:                 14 oz.
Plunger travel:        1-1/4" 
MODELS 610, 618
Features De-Sta-Co balanced construction for rigid holding and assured long life. Plunger tip is drilled and tapped to accept any 3/8-16 accessory. Model 618 is similar except for straight base and removable base bracket which may be positioned for varied angular clamping. Handle grip is red vinyl dipped. Locks in both the plunger-retracted and extended positions.
Holding capacity:   800 lbs.
Weight:                 1 lb., 14 oz.
Plunger travel:       1-5/8" 
MODEL 615
Similar to Model 605, except with reverse handle action. Plunger locks in the forward position only as the handle is moved downward. Ergonomic handle grip for greater operator comfort. The plunger is tapped to accept any 5/16-18 threaded accessory.
MODELS 620, 628
Features a reverse handle action. As handle moves back and down to horizontal lock position, plunger moves forward. Model 628 is identical except for straight base and removable bracket. Can be positioned for angular clamping by drilling base or may be used without base. Ergonomic handle grip included for greater operator comfort. Plunger is tapped for any 3/8-16 accessory.
Holding capacity:   800 lbs.
Weight:                 1 lb., 14 oz.
Plunger travel:        1-5/8" 
MODEL 630
With a forged alloy steel base, these rugged units are designed for heavy duty service. They offer maximum capacity for their size. The plunger (drilled and tapped for 3/8-16 accessory) locks in either the extended or retracted position. Red vinyl dipped handle included.
Holding capacity:   2,500 lbs.
Weight:                2 lbs., 2 oz.
Plunger travel:       2" 
MODEL 640
This straight-line action clamp is designed for heavy-duty service and offers a full 4" plunger travel, the longest of all the De-Sta-Co 600 Series straight-line action clamps. The 7/8" diameter plunger is drilled and tapped for a 1/2-13 adjustment spindle and locks in either the extended or retracted position. The low silhouette clamp is only 4-1/8" high for use where overhead clearance is a problem. Red vinyl-dipped handle supplied.
Holding capacity:   7,500 lbs.
Weight:                 7 lbs.
Plunger travel:       4" 
MODEL 650
Largest holding capacity of the straight-line action clamps. Model 650 is precision built with forged alloy steel handle and base. Snap ring pivot pin construction allows easy removal of plunger even after unit is mounted. Locks in either the extended or retracted position. Plunger is tapped to accept an 5/8-1 1 spindle or detail.
Holding capacity:   16,000 lbs.
Weight:                 5 lbs., 10 oz.
Plunger travel:       3" 
3488 FM 730 North, Decatur, TX 76234
Phone: 940-627-6031 | Toll Free: 877-5DALTEX | Fax: 940-627-7832
info@dal-texenterprises.com