DAL-TEX Enterprises, Inc. | Decatur, TX | The Complete Source of Tooling Components Needs

DRILL BUSHINGS

HEAD PRESS FIT, TYPE "H"

This drill bushing is preferable where heavy axial loads may force a headless bushing out of the jig plate.
[Technical and Ordering Information]

I.D. and O.D. Range: [COUNTER BORE DATA]

[#80-#70 x 5/32 O.D.]	[#80-#70 x 5/32 O.D.]	[3/16-"O" x 1/2 O.D.]	[55/64-15/16 x 1-1/4 O.D.]
[#69-3/64 x 5/32 O.D]	[#40-9/64 x 1/4 O.D]	["M"-11/32 x 9/16 O.D.]	[5/8 - 1-1/32 x 1-3/8 O.D.]
[#55-1/16 x 5/32 O.D]	[1/8-#10 x 5/16 O.D.]	[5/16-7/16 x 5/8 O.D.]	[1 - 1-25/64 x 1-3/4 O.D.]
[#80-#70 x 13/64 O.D.]	[#10-#1 x 3/8 O.D.]	[5/16-17/32 x 3/4 O.D.]	[1-3/8 - 1-49/64 x 2-1/4 O.D.]
[#69-3/64 x 13/64 O.D]	[3/16-"F" x 13/32O.D.]	[1/2-21/32 x 7/8 O.D.]	[Entire Range]
[#55-1/16 x 13/64 O.D.]	["A"-"L" x 7/16 O.D.]	[1/2-49/64 x 1 O.D.]	[Larger Sizes]

Back

Drill Bushings | Tooling Components | Toggle Clamps

3488 FM 730 North, Decatur, TX 76234
Phone: 940-627-6031 | Toll Free: 877-5DALTEX info@dal-texenterprises.com