|
|
|
|
| DE-STA-CO CLAMPS
- PULL
ACTION TOGGLE CLAMPS
Application
Note:
For all pull action models, the latch
point must be below the centerline
of the two pivot points in the clamp
assembly to allow proper toggle lock
action.
For Original Equipment.
For sealing chamber doors or mold
closures, the latch clamps provide
a powerful closing force, positive
holding and convenient operation.
One hand is used to engage or disengage
the latch bar while the other moves
the handle.
The "hook" or "U-bolt" type latch
clamp operates the same way but offers
an adjustment feature because of the
threaded hook. |
MODELS
301, 311
Latch-type pull action clamps
with red vinyl handle for comfort-
able operation. An adjustable stop
can be set to correctly limit handle
travel once the clamp isinstalled.
Model 301 has 4" drawing movement
and the larger Model 311 has 3-3/8".
Holding capacity:
Model 301 ---------- 375 lbs.
Model 311 ---------- 1200 lbs.
Weight:
Model 301 ---------- 12 oz.
Model 311 ---------- 19 oz. |
 |
MODELS
323, 331, 341
The over-center toggle locking
action of these clamps suits them
ideally for holding against heavy
forces
such as those generated in plastic
molding operations. These models are
ideal for quick clamping of doors,
lids, or access covers onto drums,
containers, or other vessels. The
threaded U-bolts permit easy adjustment
and provide a positive connection
with the supplied latch plate. The
vertical latch clamps are ideal for
installations where it is preferable
to mount the clamp on the lid and
the latch plate on the vessel. All
models are supplied with red vinyl
handle grip. Holding capacity:
Model 323 ---------- 360 lbs
Model 331 ---------- 700 lbs.
Model 341 ---------- 2,000 lbs.
Weight:
Model 323 ---------- 2-1/2 oz.
Model 331 ---------- 0.56 lbs.
Model 341 ---------- 1 lb. 8 oz.
Drawing Movement
Model 323 ---------- 1-3/16"
Model 331 ---------- 2-1/2"
Model 341 ---------- 2" |
|
MODELS
324, 334, 344, 374
The over-center toggle locking action of these clamps
suits them ideally for holding against heavy forces
such as those generated in plastic molding operations.
These models are ideal for quick clamping of doors,
lids, or access covers onto drums, containers, or
other vessels. The threaded U-bolts permit easy
adjustment and provide a positive connection with the
supplied latch plate. These vertical latch clamps are
ideal for installations where it ispreferable to mount
the clamp on the lid and the latch
plate on the vessel. All models are supplied with
ergonomic handle grip.
Holding capacity:
Model 324 ---------- 500 lbs.
Model 334 ---------- 1,000 lbs.
Model 344 ---------- 2,000 lbs.
Model 374 ---------- 4,000 lbs.
Weights:
Model 324 ---------- 4 oz.
Model 334 ---------- 10 oz
Model 344 ---------- 1 lb. 68 oz.
Model 374 ---------- 2 lb. 8 oz.
Drawing Movement
Model 324 ---------- 1-1/2"
Model 334 ---------- 2-1/2"
Model 344 ---------- 2-1/16"
Model 374 ---------- 1-3/4" |
|
MODELS
375, 375-B, 385, 385-L
Models 375 and 385 combine
maximum holding capability with easy
operation and simple adjusting. Both
use threaded U-bolts for adjustment.
A cast latch plate is available for
both models as an optional accessory.
The latch plate is useful in applications
such as two piece molds. The holding
capacities of both clamps are sufficient
to handle the high pressures generated
by expanding rigid urethane. Model
385-L is the same as Model 385 except
with a low profile handle.
Drawing movement:
Model 375 -------- 3-1/2"
Model 375-B -------- 3-1/2"
Model 385 -------- 2-3/16"
Model 385-L -------- 2-3/16 inches
Holding Capacity:
Model 375 -------- 4,000 lbs.
Model 375-B -------- 4,000 lbs.
Model 385 -------- 7,500 lbs.
Model 385-L -------- 7,500 lbs.
Weight:
Model 375 -------- 2 lbs., 12 oz.
Model 375-B -------- 2.5 lbs.
Model 385 -------- 3 lbs., 4 oz.
Model 385-L -------- 3 lbs., 4 oz. |
 |
MODEL
330
Models 330 and 330-SS are
the newest in our line of pull-action
clamps. As with existing models 351,
371 and 381 these new clamps can be
used in a variety of latching operations.
With the base bolted or welded in
place, these new, compact units can
be used for latching pressure vessels,
clean-out doors, etc., and can be
fit into tight areas where space is
a limitation. The pull bar is threaded
for easy adjustment, and the handle
is supplied with an ergonomically
contoured grip. Model 330-SS is the
stainless steel version. Drawing Movement: 2-3/8"
Holding capacity: 200 lbs.
Hook Adjustment: 3/16"
Weight: 4 oz. |
 |
SERIES
351, 371, 381
The pull actions of Models
351, 371 and 381 are excellent for
many types of latching operations.
With base bolted or welded in place,
unit can be used for latching pressure
vessels, clean-out doors, etc. Pull
bar is threaded for convenient adjustment.
Furnished with red vinyl grip on models
351 and 381, and an ergonomic handle
grip on model 371. Drawing Movement:
Model 351 -------- 4 inches
Model 371 -------- 5-3/8 inches
Model 381 -------- 6-1/8 inches
Holding Capacity:
Model 351 -------- 375 lbs.
Model 371 -------- 750 lbs.
Model 381 -------- 1,000 Lbs.
Hook Adjustment:
Model 351 -------- 5/16"
Model 371 -------- 11/26"
Model 381 -------- 3/4"
Weight:
Model 351 -------- 12 oz.
Model 371 -------- 1 lb., 6 oz.
Model 381 -------- 2 lbs., 8 oz. |
|
MODELS
326, 336, 346
RUBBER LATCH
- Automatically compensates
for misalignment
- Dampens vibration
- Dampens sound
- Easy to operate
- Ozone resistant synthetic rubber
- Stainless steel (passivated) components
- Three models
- Low cost
De-Sta-Co T-handle rubber latches
provide vibration and sound dampening
and compensation for severe misalignment.
The latch handle is made of an ozone
resistant synthetic rubber and the
base and keeper are formed of passivated
stainless steel. Operation is easy:
simply pull on handle and stretch
to slide bulb of rubber handle into
the keeper. Holding capacity:
Model 326 -------- 8 lbs.
Model 336 -------- 12 lbs.
Model 346 -------- 25 lbs.
Weight:
Model 326 -------- .07 lbs.
Model 336 -------- .16 lbs.
Model 346 -------- .36 lbs |
 |
|
|
| |
|
|
|
|
|
|
