Rod ends are ideal for applications not requiring flat contact with the head. Used as a stationary hinge point for cams or similar items and in applications where the bolt must pivot. Use with spherical flange assemblies and clamp assemblies.

Fully machined eyebolt provides close tolerance for assembly; Extended thread length allows for shortening while maintaining enough length to cover many applications.

FULL THREADED TOOLING EYE BOLT  

Featuring: - Extended Thread Lengths, Chrom-molly Steel, Stainless Steel. Extended Thread Length allows for shortening while maintaining enough length to cover many applications.

• 5140 alloy carbon steel no surface finish
• Stainless steel, 300 series

Engineered for extra strength and safety. Our unique shoulder design counteracts the inadvertent side load giving greater strength on angled pulls. Designing the line of action (pull) closer to the workpiece provides additional safety.
Shoulder eye bolts are designed for straight vertical pulls. General practice for other than vertical load per military standards are:
220% of the safe working load for a 45o load from vertical
20% of the safe working load for a 90o load from vertical
For consistent heavy side load (90o.) and where shock load may he anticipated, hoist rings with swiveling and pivoting features are to be used.

Eye bolts are designed for straight vertical pulls.  Safe working loads drop off to 25% for 45 degree pulling angles.

Stainless steel eye bolts are available for use in corrosive or damp areas.

Metric eye bolts are available for those applications already tapped with metric thread sizes.

CASE HARDENED, BLACK OXIDE FINISH

Jig Latch Bolts are similar to swing bolts. They have a thinner head, longer shank and are threaded much closer to the head.

Combines the convenience of the Rotary T-slot Nut with  the strength and simplicity of the forged T-slot Bolts. Slot on the top of the bolts makes it easy to rotate the head in the T-slot. Fully threaded shank for versatility. Heat treated to grade 5 strength, black oxided.

THREADS CLASS 2A UNC, BLACK FINISH

Medium Carbon Alloy Steel, Threads Class 2A UNC, HEAT TREATED, BLACK OXIDE FINISH

Special fastener with slot on the end. With a screw driver the T-head can be turned and locked in channel.
The slot also facilitates fastening as the bolt can be steadied or retained in tight spots or odd positions.

T-strap bolts are used to hold down parts. 
Grade 5, Zinc plated.