DRILL BUSHINGS
- ORDERING INFORMATION
Oil Groove Bushings may be considered in drill bushing.
EXAMPLE: |
Quantity |
Bushing Type |
I.D. "A" |
O.D. "B" |
Oil
Grove Type |
Wiper Style |
6 |
P |
3/4 |
1" |
AJ |
AAA |
| Select from 25 different types of oil grooves as shown on this section. I.D. range from 1/2" min. to 6" max. Length range from 1/2" min. to 6" max. Oil grooves are 3/64" wide x 3/64" deep. Oil holes are 1/4" dia. O.D. grooves are 5/16" wide. Bushings with any of the following three conditions: I.D. one inch or less, O.D. one inch or less, length one inch or less will have 3/16" wide x 1/32" deep O.D. grooves, oil hole 1/8". |
| WIPER DESIGNS |
| To
guard against dirt and/or chips merely
add the appropriate wiper style with your
order.
Note: The oil groove should never break out at the wiper end of the bushing. |
| APPLICATION DATA |
| Oil groove bushings are used when bushing applications require lubrication |
|
|
| *Style "ABB" wiper will be furnished when wall thickness exceeds 1/4". We reserve the right to make changes and improvements that may be desirable. |
