INSERT INSTALLATION
E-Z LOK external threads are standard size and pitch to permit use
of standard drills and taps. No special top sizes or installation
tools are required. Installation is easy as 1-2-3
Use E-Z LOK Thread Inserts for:
-Jigs
and Fixtures
-Bolster Plates
-Dies
-Machine Tools
-Metal Patterns
-Farm Machinery
-Engine Blocks
-Parts Salvage
-Stripped Threads in any material
Power drive tools are available for volume installation...See insert
tables for catalog numbers and sizes.
Automatic self-locking external thread with pre-applied,
use activated Loctite(r)
E-Z
LOK inserts will not back out
or vibrate loose.
Immediately on installation, micro-encapsulated
Loctite(r) begins to set and the
newly
installed insert can be fastened
to within minutes. The adhesive
continues to cure overnight
until completely set.
The adhesive seals against liquids
and gases to pressures of 6,000
psi and bonds to virtually all metals EASY REMOVAL: Use a standard
screw and bolt extractor to back
out a damaged insert and then replace
it
with a new insert.
Removal is simply a matter of overcoming
the resistance to torque-out which
has been produced by the
thread locking material.
