| PNEUMATIC
SWING CYLINDERS
Clamping Force
|
 |
Mounting
Options
Swing Cylinder Rotation: Frame of
reference for specifying rotation
is the clamping stroke. A right-hand |
unit
rotates clockwise and then clamps
down; a left-hand unit rotates counter-clockwise,
and then clamps down |
 |
8100,
8300 Mounting Options
|
1.
Threaded body in a tapped hole. Position
is locked by a single cap screw into
a tapped hole in fixture
2. Cylinder body passes through a
clearance hole. Three mounting screws
pass through the top flange into holes
tapped in fixture.
3. Optional mounting block 821553
may be used above or below the work
surface. Clamp height is easily reset. |
1.
Can be mounted to the side or front
of the fixrture, or mounted back to
back for multiple clamping operations.
2. Mounted to the top of the work
surface through two mounting holes
in bottom of unit. |
